LK Automation Limited
Brand:
Yaskawa
SGMPH-01BBA8C Servo motor
Yaskawa SGMPH-01BBA8C Product information and technical parameters：
Brand: Yaskawa
Name: Servo motor
Model: SGMPH-01BBA8C
Servo motor type SGMPH (speed: 3000r\/min).
Power: 0.1kw.
Power supply voltage: single phase AC100V.
Serial encoder: 16 bit relative value.
Design sequence: A.
Shaft end: straight shaft with screw.
Optional parts: with DC24V brake.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated
DC power input servo unit type SGDV.
Maximum applicable motor capacity: 11W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: A.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMPH-01BBA8C SGMPH-01BBA8C
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out SGMPH-01BBA8C.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor SGMPH-01BBA8C. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time to the user system for the best setting.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction compensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment.Sigma -V series servo motor SGMSV.
Rated output: 1.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
HHeat resistance grade: F SGMPH-01BBA8C.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGMPH-01BBA8C.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Maximum applicable motor capacity: 11W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: A.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMPH-01BBA8C SGMPH-01BBA8C
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out SGMPH-01BBA8C.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor SGMPH-01BBA8C. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time to the user system for the best setting.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction compensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment.Sigma -V series servo motor SGMSV.
Rated output: 1.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
HHeat resistance grade: F SGMPH-01BBA8C.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGMPH-01BBA8C.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
...More relevant models >>>>
Related download