LK Automation Limited
Brand:
Yaskawa
SGMAV-08A3A6C Ultra low inertia servo motor
Yaskawa SGMAV-08A3A6C Manual And Instructions
SGMAV-08A3A6C Setup Rotational MotorREFERENCE MANUAL
Yaskawa SGMAV-08A3A6C Product information and technical parameters：
Brand: Yaskawa
Name: Ultra low inertia servo motor
Model: SGMAV-08A3A6C
Sigma -V series servo motor SGMAV.
Rated output: 0.75KW (750W).
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with hold brake (DC24V).
Super power rate.
Small capacity.
Ultra low inertia
Instantaneous maximum torque (rating 300%).
Equipped with a high resolution serial encoder (20 bit).
Max speed up to 6000r\/min.
Variety is complete (50W ~ 1.0kw, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot，
Handling machinery，
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
...More relevant models >>>>
SGMAV-08A3A6C Setup Rotational MotorREFERENCE MANUAL
Yaskawa SGMAV-08A3A6C Product information and technical parameters：
Brand: Yaskawa
Name: Ultra low inertia servo motor
Model: SGMAV-08A3A6C
Sigma -V series servo motor SGMAV.
Rated output: 0.75KW (750W).
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with hold brake (DC24V).
Super power rate.
Small capacity.
Ultra low inertia
Instantaneous maximum torque (rating 300%).
Equipped with a high resolution serial encoder (20 bit).
Max speed up to 6000r\/min.
Variety is complete (50W ~ 1.0kw, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot，
Handling machinery，
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
DC power input servo unit type SGDV.
Maximum applicable motor capacity: 11W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: B.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMAV-08A3A6C SGMAV-08A3A6C
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out SGMAV-08A3A6C.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor SGMAV-08A3A6C. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time to the user system for the best setting.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction compensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment.Servo motor type SGMAH (speed: 3000r\/min).
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: A.
Shaft end: straight shaft without key.
Optional parts: no brake oil seal.
Improve mechanical properties.
In order to achieve a higher production efficiency, SGDMAH type to the best control to explore the highest performance of the machine,
Compared with the original models, CPU computing time for its 1\/2, through the expansion of the new control algorithm,
Positioning time is shortened to the original product of 1\/3, to achieve a good response.
The parameter setting aand maintenance time is shortened SGMAV-08A3A6C.
In order to establish a high degree system in a short time, the use of the simplicity of the.
Flexible use of online automatic adjustment function,
Automatic adjustment of servo system with mechanicall characteristics SGMAV-08A3A6C.
Then use the main loop \/ control circuit power separation and alarm tracking memory function, can be simple to carry out maintenance
Maximum applicable motor capacity: 11W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: B.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMAV-08A3A6C SGMAV-08A3A6C
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out SGMAV-08A3A6C.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor SGMAV-08A3A6C. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time to the user system for the best setting.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction compensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment.Servo motor type SGMAH (speed: 3000r\/min).
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: A.
Shaft end: straight shaft without key.
Optional parts: no brake oil seal.
Improve mechanical properties.
In order to achieve a higher production efficiency, SGDMAH type to the best control to explore the highest performance of the machine,
Compared with the original models, CPU computing time for its 1\/2, through the expansion of the new control algorithm,
Positioning time is shortened to the original product of 1\/3, to achieve a good response.
The parameter setting aand maintenance time is shortened SGMAV-08A3A6C.
In order to establish a high degree system in a short time, the use of the simplicity of the.
Flexible use of online automatic adjustment function,
Automatic adjustment of servo system with mechanicall characteristics SGMAV-08A3A6C.
Then use the main loop \/ control circuit power separation and alarm tracking memory function, can be simple to carry out maintenance
...More relevant models >>>>