LK Automation Limited LK Automation Limited
Brand Sort: Yaskawa
Home >> Price
YASKAWA SGMJV-C2AAA2C Price
YASKAWA SGMJV-C2AAA2C
Large capacity SGMVV type servo motor.
Rated output: 45KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (with keyway and screw).
Optional parts: keep the brake (DC24V), with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products SGMJV-C2AAA2C
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMJV.
Rated output: 0.75KW (750W).
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal, with the brake (DC24V).
Medium inertia.
Instantaneous maximum torque (rating 350%).
Equipped with a high resolution serial encoder (13\/20 bit).
Max speed up to 6000r\/min.
Variety is complete (50 ~ 750W, with hold brake).
Use example:
Semiconductor manufacturing equipment,
Placement machine,
Punch printed circuit board,
Robot,
Handling machinery,
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: B.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationServo motor type SGMPH (speed: 3000r/min).
Power: 0.4kw.
Power supply voltage: single phase AC200V.
Serial encoder: 13 bit relative value.
Design sequence: A.
Shaft end: straight shaft with screw key.
Optional parts: with DC24V brake.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated.
SGMJV-C2AAA2C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMJV-C2AAA2C&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Middle inertia rotary servo motor
SGMJV-01ADA6S
Yaskawa Middle inertia rotary servo motor SGMJV-01ADA6S
Sigma -V series servo motor SGMJV. Rated
Yaskawa
Middle inertia rotary servo motor
SGMJV-02AAAB1
Yaskawa Middle inertia rotary servo motor SGMJV-02AAAB1
Sigma -V series servo motor SGMJV. Rated
Yaskawa
Middle inertia rotary servo motor
SGMJV-02AAA6S
Yaskawa Middle inertia rotary servo motor SGMJV-02AAA6S
Sigma -V series servo motor SGMJV. Rated
Yaskawa
Middle inertia rotary servo motor
SGMJV-01A3A6E
Yaskawa Middle inertia rotary servo motor SGMJV-01A3A6E
Sigma -V series servo motor SGMJV. Rated