LK Automation Limited LK Automation Limited
Brand Sort: Yaskawa
Home >> Price
YASKAWA SGMGH-55A2D2B Price
  • Brand: YASKAWA
  • Country:
  • Name: Motor for high precision machine tool
  • Model: SGMGH-55A2D2B
  • Price: 0
  • >
YASKAWA SGMGH-55A2D2B
Low inertia, high speed servo motor type SGM7A (rated speed 3000r\/min).
Rated output: 0.4kw.
Power supply voltage: AC200V.
Serial encoder: 24 bit absolute value type.
Design sequence: A.
Shaft end: straight shaft with keyway, with screw.
Optional parts: no purchase pieces.
Small (about 80% in the past).
Equipped with high-resolution 24bit encoder (16 million 770 thousand \/rev pulse).
The maximum torque of 350% (small capacity) SGMGH-55A2D2B
Hope to shorten the working cycle.
Want to improve positioning accuracy.
Increase speed after shaking.
Whether there is no workpiece, action is not stable.
It is helpful to the servo performance of ultra high speed and ultra precision control. most
To limit the performance of the device to solve the problemServo motor type SGMPH (speed: 3000r\/min).
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with screw key.
Optional parts: with DC24V brake.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operatedSigma -V series servo motor SGMGV.
Rated output: 7.5kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal, with the brake (DC90V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGH-55A2D2B Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGMGH-55A2D2B&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Motor for high precision machine tool
SGMGH-09A2C2D
Yaskawa Motor for high precision machine tool SGMGH-09A2C2D
Servo motor SGMGH type. Rated speed: 150
Yaskawa
Motor for high precision machine tool
SGMGH-44A2C2B
Yaskawa Motor for high precision machine tool SGMGH-44A2C2B
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-30A2A3S
Yaskawa servo motor SGMGH-30A2A3S
Servo motor SGMGH type. Rated speed: 150
Yaskawa
servo motor
SGMGH-40A2B6D
Yaskawa servo motor SGMGH-40A2B6D
Servo motor SGMGH type. Rated speed: 100