LK Automation Limited LK Automation Limited
Download Sort: Yaskawa
Home >> Manual Download
SGMGV-13A3C2E Product Manual (Setup Rotational Motor)
Product model: SGMGV-13A3C2E
Name: SERVO PACK
Brand: Yaskawa
Sort: Setup Rotational Motor Product Manual
File language: English
SGMCS small capacity type of direct drive servo motor.
Rated torque: M \/ 25N.
Servo motor outside diameter size: 135mm.
Serial encoder: 20 bit absolute value type (absolute value of 1 circles) (standard).
Design sequence: the outer diameter of the servo motor is marked as B, C and D.
Flange specification: face C, reverse load side SGMGV-13A3C2E Product Manual.
Optional specifications: no matching SGMGV-13A3C2E
Under the condition of no speed reducer, the load is directly driven.
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 6 ~ 600N \/ m, maximum speed: 250 ~ 500r\/min).
By using 20 bit high resolution encoder, the high precision can be carried out.
The use of hollow structure, convenient wiring and piping SGMGV-13A3C2E Product Manual.
Use example:
Semiconductor manufacturing equipment.
Liquid crystal circuit board manufacturing equipment.
Various inspection and test equipment.
Electronic part packaging machine.
IC information processor.
IC inspection equipment.
A variety of automated machinery.
Robot。
Small capacity ratings and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above SGMGV-13A3C2E Product Manual.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: A.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP42 (except for the rotating part of the output shaft).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationLarge capacity SGMVV type servo motor.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC90V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength oof the mechanical properties SGMGV-13A3C2E Manual.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusteed, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happen
Related products
Yaskawa
Rotary servo motor
SGMGV-20DDC6E
Yaskawa Rotary servo motor SGMGV-20DDC6E
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-09D3A2E
Yaskawa Rotary servo motor SGMGV-09D3A2E
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-03D3A6C
Yaskawa Rotary servo motor SGMGV-03D3A6C
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-03ADA6E
Yaskawa Rotary servo motor SGMGV-03ADA6E
Sigma -V series servo motor SGMGV. Rated