LK Automation Limited LK Automation Limited
Download Sort: Yaskawa
Home >> Manual Download
SGDV-3R5D21A002EX002 USER'S MANUAL (Design and Maintenance)
Product model: SGDV-3R5D21A002EX002
Name: Servo amplifier
Brand: Yaskawa
Sort: Design and Maintenance USER'S MANUAL
File language: English
Type: SGDH type drive.
Capacity: 6.0kw.
Voltage: three phase 400V.
Mode: torque, speed, position.
Test platform for mutual feedback of servo driver and motor.
Test platform with adjustable analog load.
A test platform with an actuator that has no load is used.
Test platform for driving the inherent load by using motor SGDV-3R5D21A002EX002 USER'S MANUAL.
Test platform using on line test method SGDV-3R5D21A002EX002
This test system is composed of three parts,
Were measured servo driver - motor system, the system inherent load and host computer.
The host computer sends the speed command signal to the servo driver, and the servo system starts to run according to the instruction.
In the course of operation, the running data of the servo system is collected by the host computer and the data acquisition circuit,
And carries on the preservation, the analysis and the display to the data SGDV-3R5D21A002EX002 USER'S MANUAL. Large capacity SGMVV type servo motor.
Rated output: 30KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 800r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC24V), with oil seal SGDV-3R5D21A002EX002 USER'S MANUAL.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenServo motor type SGMPH (speed: 3000r\/min).
Power: 1.5kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with key.
Optional parts: no brake oil seal.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 1000V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer SGDV-3R5D21A002EX002 Manual.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a veery seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated
Related products
Yaskawa
Best use servo unit
SGDV-3R5D21A020FT001
Yaskawa Best use servo unit SGDV-3R5D21A020FT001
High performance, use the est type of s
Yaskawa
Best use servo unit
SGDV-3R5D25A002FT006
Yaskawa Best use servo unit SGDV-3R5D25A002FT006
High performance, use the est type of s
Yaskawa
High performance servo driver
SGDV-3R5D21A020EX001
Yaskawa High performance servo driver SGDV-3R5D21A020EX001
High performance, use the est type of s
Yaskawa
High performance servo driver
SGDV-220A01A002EX002
Yaskawa High performance servo driver SGDV-220A01A002EX002
High performance, use the est type of s